|
Valves |
||
|
|
||
|
FP-BP
Two-way pneumatic on-off valves, free flow (45°), available in normally closed, normally open or double effect operation, from ND 15 to ND 65, with AISI 304 stainless steel servocontrol and max. working temperature 190°C. FP series: with AISI 316 stainless steel body, available with the following connections: threaded GAS female, socket welding, NPT threaded, flanged with UNI PN 16 drilling, flanged reduced. BP seris: with Rg5 bronze body and available with threaded GAS female connections. For further information please refer to FP-BP catalogue.
FA
Three-way pneumatic on-off deflection valves, conveyed flow, available in normally closed, normally open or double effect operation, from ND 15 to ND 100. Spheroidal cast iron body and AISI 304 stainless steel servocontrol, max. working temperature 190°C. For further information please refer to FA catalogue.
GP
Two-way pneumatic on-off valves, conveyed flow, available in normally closed, normally open or double effect operation, from ND 15 to ND 80. Gray iron body and AISI 304 stainless steel servocontrol, max. working temperature 190°C. For further information please refer to GP catalogue.
FY-FSQ
FY and FSQ impurity collecting filters, are used oon installations to preserve the integrity and eliminate any impurity inside them. FY series: are available from ND 15 to ND 65 with free flow body (45°) and AISI 316 stainless steel cast body, and from ND 80 to ND 200 with AISI 316 stainless steel body from electrowelded sheet. FSQ series: square body, available from ND 15 to ND 32 with AISI 316 stainless steel cast body, and from ND 40 to ND 200 with AISI 316 stainless steel body from electrowelded sheet.. For further information please refer to FY-FSQ catalogue.
SQ98-SQ-SQT
Square pneumatic on-off valves, available in normally closed, normally open or double effect operation, with AISI 304 stainless steel servocontrol. SQ98 series: with AISI 316 stainless steel cast body, available from ND 8 to ND 50, with the following connections: threaded GAS female, socked welding and flanged with UNI PN 16 drilling, flanged reduced, max. working temperature 190°C. SQ series: with AISI 316 stainless steel square body from electrowelded sheet, available from ND 65 to ND 200, with the following connections: butt welding, flanged with UNI PN 16 drilling, flanged reduced and max. working temperature 150°C. SQT series: Three-way deflection version of SQ98 and SQ models, available from ND15 to ND 125, with the same characteristics as the SQ series. For further information please refer to SQ98-SQ-SQT catalogue.
FL
Two-way pneumatic on-off valves, free flow (45°), available in normally closed, normally open or double effect operation, from ND 40 to ND 200 with the following connections: head welding, flanged with UNI PN 16 drilling, flanged reduced. AISI 316 stainless steel body from electrowelded sheet and AISI 304 stainless steel servocontrol, max. working temperature 150°C. For further information please refer to FL catalogue.
M9-2
Two-way pneumatic control valves with spheroidal cast iron body available from ND 15 to ND 100, operated by membrane servocontrol type: SS0 (Ø 200), SS1 (Ø 275), SS3 (Ø 360) e SS2 (Ø 430). For further information please refer to M9-2 catalogue.
M9-3
Three-way pneumatic control valves available from ND 15 tol ND 100, operated by membrane servocontrol type: SS0 (Ø 200), SS1 (Ø 275), SS3 (Ø 360) e SS2 (Ø 430) . Available in the version with three deviating ways or three mixing ways. For further information please refer to M9-3 catalogue.
SF
Ball valves with AISI 316 stainless steel cast body available from ND 8 to ND 100, in the two-way models used up to a max. pressure of 1000psi, and three-way model working at a max. pressure of 800psi. Available connections for two-way models are: threaded GAS female, butt welding, and with UNI PN 16 drilling flanges or reduced flanges on request. The three-way version is available with threaded GAS female connection or with UNI PN 16 drilling flanges or reduced flanges on request. Valves can be operated through: manual lever, simple/double effect pneumatic actuator or electric operator. Actuators can be equipped with electric, pneumatic, magnetic or positioning limit switches. For further information please refer to SF catalogue.
|
MIX/F-MIX/M-BABY
MIX/F mixers with flange connection and MIX/M mixers with clamp connection have electric motor and light alloy cap. All parts in contact with the fluid are in AISI 316 stainless steel. Both versions can be supplied with AISI 316 stainless steel cap and specific design solutions can be provided on request. BABY portable mixers are controlled by an ATLAS-COPCO pneumatic gun motor. The shaft, 600 mm long, and the auger dia.96mm are protected. For further information please refer to MIX/M-BABY catalogue.
MAN
Manual valves with free flow body, available from ND 15 to ND 65, with the following connections: threaded GAS female, socket welding, NPT threaded, flanged with UNI PN 16 drilling, flanged reduced. AISI 316 stainless steel cast body, max. working temperature 190°C. For further information please refer to MAN catalogue.
MISQ-MIFP-MN
Pneumatic on-off valves-square MISQ series , free flow MIFP series and conveyed flow MN series can be supplied in the normally closed, normally open versions and work at a max. temperature of 150°C. The outstanding feature of these valves is their extremely reduced overall dimensions allowing to effectively solve the problem of lack of space inside the plants. MISQ series: available from ND 8 to ND 25, with the following connections: threaded GAS female, threaded GAS male,flanged. Square valve body (90°) in AISI 316 stainless steel and one AISI 304 stainless steel servocontrol Ø 36 for all nominal diameters. MIFP series: with the same characteristics as MISQ series except for the free flow body (45°), available from ND 15 to ND 25, with threaded GAS female and flanged connections. MN series: available with nominal diameter 6 only with threaded 1/4" GAS female connections. Conveyed flow body with seat Ø 6 obtained from full and servocontrol Ø 25 in AISI 316 stainless steel. For further information please refer to MISQ-MIFP-MN catalogue.
CX
ISO 6431 pneumatic cylinders in stainless steel, available bores: Ø 32-40-50-63-80-100-125-160-200. CX cylinders can be supplied with strokes in accordance with the specific customer requirements and, being built in stainless steel, they can be used in particularly aggressive environments. Availability of all assemblies provided by ISO (passing stem, tandem, non rotating stem, etc.) For further information please refer to CX catalogue.
FPMD-SQMD
AISI 316 stainless steel body and modulating servocontrol; available from ND 15 to ND 65 in the different driving signasl: 3÷15, 6÷18, 6÷30. They can work at a max. temperature of 190°C and can be supplied with a wide range of connections. Characterized by reduced overall dimensions allowing the installation even in case of space constraints.. FPMD series: free flow body (45°) SQMD series: square body (90°) For further information please refer to FPMD-SQMD catalogue.
AP
Simple/Double effect pneumatic actuators with 90° angle of rotation feature a wide range of torques to meet any customers requirement. The lower part is drilled to be fixed to the valve in compliance with ISO 5211/DIN 3337 standars, while the solenoid valve interface, the upper shaft edge and the upper drilling for fixing the accessories are in compliance with VDI/VDE 3845 NAMUR standards. A wide range of accessories can be fitted on them such as: limit switches, solenoid valve, positioner, disengageable gear, lever, etc. For further information please refer to AP catalogue.
FW-LU
Total seal bidirectional butterfly valves, available from ND 40 to ND 600, with body in nodular cast iron, carbon steel or AISI 316 stainless steel. The gasket material can be chosen among: BUNA N, EPDM HT, Teflon, Viton, Silicone, Hypalon, Neoprene and Natural Rubber. The disk is available in spheroidal cast iron, carbon steel or AISI 316 stainless steel.. Valves can be operated throught: manoval lever, double/simple effect pneumatic actuator, mechanical reduction gear with hand-wheel, electric reduction gear. FW series: with Wafer body LU series : with LUG body Partial seal butterfly valves are also available (without gasket). For further information please refer to FW-LU catalogue.
PD
Simple/Double effedt metering pumps built in AISI 316 stainless steel, equipped with unidirectional suction/delivery check valves, entrance filter and magnetic sensors. The simple effect model is built in the standard versions with the following capacities expressed in cubic centimeters: 30, 70, 110, 125, 250. The double effect model features the following cubic centimeters capacities: 160, 250, 460, 950, 1350. In case of special requirements, models can be built on request. For further information please refer to PD catalogue.
|
|